File:Montaggio-estrusore.jpg

From wiki3dline
Revision as of 12:36, 26 April 2017 by Assistenza3dline (talk | contribs) (montaggio estrusore mks hotend reprap 3dprinter)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Montaggio-estrusore.jpg ‎(512 × 469 pixels, file size: 131 KB, MIME type: image/jpeg)

montaggio estrusore mks hotend reprap 3dprinter

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current12:36, 26 April 2017Thumbnail for version as of 12:36, 26 April 2017512 × 469 (131 KB)Assistenza3dline (talk | contribs)montaggio estrusore mks hotend reprap 3dprinter
  • You cannot overwrite this file.

The following page links to this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from its original state, some details may not fully reflect the modified file.
Camera manufacturer NIKON CORPORATION
Camera model NIKON D3200
Exposure time 1/60 sec (0.016666666666667)
F Number f/4
ISO speed rating 800
Date and time of data generation 13:20, 30 March 2017
Lens focal length 26 mm
Orientation Normal
Horizontal resolution 300 dpi
Vertical resolution 300 dpi
Software used Ver.1.04
File change date and time 13:20, 30 March 2017
Y and C positioning Co-sited
Exposure Program Not defined
Exif version 2.3
Date and time of digitizing 13:20, 30 March 2017
Meaning of each component
  1. Y
  2. Cb
  3. Cr
  4. does not exist
Image compression mode 4
APEX exposure bias 0
Maximum land aperture 4 APEX (f/4)
Metering mode Pattern
Light source Unknown
Flash Flash fired, strobe return light detected, auto mode
Retrieved from "https://www.costruiscilatuastampante3d.com/index.php?title=File:Montaggio-estrusore.jpg&oldid=203"