File:Struttura in profilati basamento 3dielle alluminio meccanica stampante 3d.jpg

From wiki3dline
Revision as of 11:44, 26 April 2017 by Assistenza3dline (talk | contribs) (assemblaggio asse x stampante 3d come costruire una stampante 3d prusa mendel)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Struttura_in_profilati_basamento_3dielle_alluminio_meccanica_stampante_3d.jpg ‎(800 × 532 pixels, file size: 312 KB, MIME type: image/jpeg)

assemblaggio asse x stampante 3d come costruire una stampante 3d prusa mendel

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current11:44, 26 April 2017Thumbnail for version as of 11:44, 26 April 2017800 × 532 (312 KB)Assistenza3dline (talk | contribs)assemblaggio asse x stampante 3d come costruire una stampante 3d prusa mendel
  • You cannot overwrite this file.

The following page links to this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from its original state, some details may not fully reflect the modified file.
Camera manufacturer NIKON CORPORATION
Camera model NIKON D3200
Exposure time 1/60 sec (0.016666666666667)
F Number f/4.5
ISO speed rating 2,200
Date and time of data generation 22:11, 5 January 2017
Lens focal length 34 mm
Width 6,016 px
Height 4,000 px
Bits per component
  • 8
  • 8
  • 8
Pixel composition RGB
Orientation Normal
Number of components 3
Horizontal resolution 300 dpi
Vertical resolution 300 dpi
Software used Adobe Photoshop CC 2015 (Windows)
File change date and time 19:28, 7 February 2017
Y and C positioning Co-sited
Exposure Program Not defined
Exif version 2.3
Date and time of digitizing 22:11, 5 January 2017
Meaning of each component
  1. Y
  2. Cb
  3. Cr
  4. does not exist
Image compression mode 4
APEX shutter speed 5.906891
APEX aperture 4.33985
APEX exposure bias 0
Maximum land aperture 4.3 APEX (f/4.44)
Metering mode Pattern
Light source Unknown
Flash Flash fired, strobe return light detected, auto mode
DateTime subseconds 50
DateTimeOriginal subseconds 50
DateTimeDigitized subseconds 50
Supported Flashpix version 0,100
Color space sRGB
Sensing method One-chip color area sensor
File source Digital still camera
Scene type A directly photographed image
Custom image processing Normal process
Exposure mode Auto exposure
White balance Auto white balance
Digital zoom ratio 1
Focal length in 35 mm film 51 mm
Scene capture type Standard
Scene control High gain up
Contrast Normal
Saturation Normal
Sharpness Normal
Subject distance range Unknown
GPS tag version 2.3.0.0
Serial number of camera 7525468
Lens used 18.0-55.0 mm f/3.5-5.6
Date metadata was last modified 20:28, 7 February 2017
Unique ID of original document 6B0459CB6A70BD079D1223C23E97058A
IIM version 15
Retrieved from "https://www.costruiscilatuastampante3d.com/index.php?title=File:Struttura_in_profilati_basamento_3dielle_alluminio_meccanica_stampante_3d.jpg&oldid=170"