File:Come costruire una stampante 3d asse z wiki 3dielle.jpg

From wiki3dline
Revision as of 11:31, 26 April 2017 by Assistenza3dline (talk | contribs) (come assemblare una stampante 3d istruzioni in italiano complete)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Come_costruire_una_stampante_3d_asse_z_wiki_3dielle.jpg ‎(800 × 532 pixels, file size: 325 KB, MIME type: image/jpeg)

come assemblare una stampante 3d istruzioni in italiano complete

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current11:31, 26 April 2017Thumbnail for version as of 11:31, 26 April 2017800 × 532 (325 KB)Assistenza3dline (talk | contribs)come assemblare una stampante 3d istruzioni in italiano complete
  • You cannot overwrite this file.

The following page links to this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from its original state, some details may not fully reflect the modified file.
Camera manufacturer NIKON CORPORATION
Camera model NIKON D3200
Exposure time 1/60 sec (0.016666666666667)
F Number f/4
ISO speed rating 560
Date and time of data generation 14:05, 5 January 2017
Lens focal length 28 mm
Width 6,016 px
Height 4,000 px
Bits per component
  • 8
  • 8
  • 8
Pixel composition RGB
Orientation Normal
Number of components 3
Horizontal resolution 300 dpi
Vertical resolution 300 dpi
Software used Adobe Photoshop CC 2015 (Windows)
File change date and time 10:42, 24 January 2017
Y and C positioning Co-sited
Exposure Program Not defined
Exif version 2.3
Date and time of digitizing 14:05, 5 January 2017
Meaning of each component
  1. Y
  2. Cb
  3. Cr
  4. does not exist
Image compression mode 4
APEX shutter speed 5.906891
APEX aperture 4
APEX exposure bias 0
Maximum land aperture 4 APEX (f/4)
Metering mode Pattern
Light source Unknown
Flash Flash fired, strobe return light detected, auto mode
DateTime subseconds 60
DateTimeOriginal subseconds 60
DateTimeDigitized subseconds 60
Supported Flashpix version 0,100
Color space sRGB
Sensing method One-chip color area sensor
File source Digital still camera
Scene type A directly photographed image
Custom image processing Normal process
Exposure mode Auto exposure
White balance Auto white balance
Digital zoom ratio 1
Focal length in 35 mm film 42 mm
Scene capture type Standard
Scene control Low gain up
Contrast Normal
Saturation Normal
Sharpness Normal
Subject distance range Unknown
GPS tag version 2.3.0.0
Serial number of camera 7525468
Lens used 18.0-55.0 mm f/3.5-5.6
Date metadata was last modified 11:42, 24 January 2017
Unique ID of original document BB7645070B8ED77008AD5BDEDA7872F5
IIM version 60,443
Retrieved from "https://www.costruiscilatuastampante3d.com/index.php?title=File:Come_costruire_una_stampante_3d_asse_z_wiki_3dielle.jpg&oldid=162"